The ZBE110-35 is a floor standing unit and consists of a Ziegra ZBE110kg icemaker with an integrated 35kg insulated storage unit. The ice machine is a plug in unit and requires only connection to water and mains power supply. It is continuously rated and works fully automatically. No moving parts in the refrigeration circuit of the evaporator, hence no leaks due to rotating seals. The compact size of the ZBE110-35 makes it ideal for laboratory use.
|
 |
|||
Ice machine specifications
|
||||
| Cabinet: | Stainless steel | |||
| Warranty: | 2 years | |||
| Ice production (24hours): | 110kg (guaranteed at 20°C air and 15°C water) | |||
| Ice storage | 35kg | |||
| Condenser: | Air cooled (water cooling available on request) | |||
| Voltage: | 240-1-50Hz | |||
| Control voltage: | 240-1-50Hz | |||
| Machine weight: | 80kg | |||
| Shipping dimensions: (wxdxh) | 0.55 x 0.67 x 1.03m | |||
| Shipping weight: | 90kg | |||
| Power consumption: | 0.6kW | |||
| Current consumption: | 4.2A | |||
| Refrigerant: | R404A (0.6kg) | |||
| Heat emission: | 0.71kW | |||
| Noise level: | 57dBA - 3m | |||
| Water connection: | 3/4" BSP (minimum water pressure 2bar, maximum 6bar) | |||
| Water supply required (site): | 15mm copper or plastic terminating in a 3/4" BSP fitting, minimum water pressure 2bar, maximum 6bar Potable: Ph range between 6.5 and 9.5 | |||
| Overflow: | 14mm ø. | |||
| Fuse: | 13A | |||
| Cable cross section: | 1.5 mm2, Cu. | |||
Ice machine connections and dimensions |
||||
 |
 |
D. Electric cable/plug Weight of ice machine. 80kg |
||
Available Ice Types |
|||
|---|---|---|---|
| The ZBE110-35 ice machine can make either of the ice types below, simply state on the order which type of ice you require. The ice type does not effect the price. Click on an image for details and images of each ice type. | |||
 |
 |
 |
|
| Very small flakes of ice, sometimes known as 'crushed ice'. The gentlest type of ice for packing delicate products and also where rapid cooling is required. | Medium sized flakes of ice. |
||
| Included with ice machine | |
| Ziegra single water filtration kit |  |
The Ziegra single water filtration kit helps prevent the water related problems that can impair the efficiency, reliablity and longevity of any ice machine. Helps prevent the ingress of dirt and dissolved minerals which can coat evaporation surfaces, block lines and jam valves. |
|
| Water connection hose (part # 970221124) |  |
| Water inlet hose to connect from the outlet of the Ziegra single water filter and the water inlet of the ice machine. | |
| Small ice scoop |  |
| A small polymer scoop for hygienic handling of the ice. | |
Options |
|
Drain Pump (part # ZUK9700011) |
 |
| A pump to assist meltwater drain when the room drain is lower than or at the same level as the drain on the bin. Often used in Laboratory installations. | |
Stainless steel stand |
 |
A stainless steel stand to raise the machine for easier ice access and drainage. Does away with the need for a drain pump if the building drain is higher than the machine drain. |
|
Ziegra Ice Machines (UK) Ltd Unit 2, Phoenix Court, Hammond Avenue, Stockport, Cheshire, SK4 1PQ Tel:0844 8808055 Fax: 0161 480 7927 Email: ice@ziegra.co.uk |