ZBE150-S280 - 150kg ice machine and storage
 
ZBE250-S280 ice machine

The ZBE150-S280 consists of a ZBE150 ice machine with a choice of two ice flake sizes, on top of an S280 slope fronted ice storage bin.

The unit operates automatically, stopping when the bin is full and re-starting when ice is removed.

This type of flake ice is made at -0.5°C so will not freeze together, making it ideal where no refrigerated storage is available.

The ice machine is a plug in unit and requires only connection to water and mains power supply. It is continuously rated and works fully automatically. No moving parts in the refrigeration circuit of the evaporator, hence no leaks due to rotating seals.

The hygienic sealed water system, boxed in construction and stainless steel panels makes this machine ideal for installation in factory environments where safety and hygiene are of paramount importance, especially when people may be working around the machine.

The bin is of a slope fronted design and construction is of welded steel shell and frame. Exterior finish is stainless steel front, top and sides with galvanised steel back and bottom.

The bin has non-corroding polyethylene liner inside. Insulation is non-CFC polyurethane foam, bonded to shell and liner for added strength. Lift door has a stainless steel exterior and ABS interior, bonded together with non-CFC polyurethane foam for extra rigidity and strength. A conveniently low door sill height allows easy access to ice in the bottom of the bin. Door opening to be sealed with fully replaceable gasketing. Legs adjustable from 152mm to 191mm. Bin drain 1” FPT rigid PVC.

         
Specifications
Cabinet: Stainless steel
Warranty: 2 years
Ice production (24hours): 150kg (guaranteed at 20°C air and 15°C water)
Ice storage 280kg (0.85m3)
Voltage: 240-1-50Hz
Control voltage: 240-1-50Hz
Shipping dimensions: (wxdxh) 1.28 x 0.87 x 2.0m
Shipping weight: 160kg
Power consumption: 1.1kW
Current consumption: 5.3A
Refrigerant: R404A (1.2kg)
Heat emission: 1.3kW
Air-cooled condenser (standard) 440 m3 / hour
Water cooled condenser (optional) 110 l / hour at 15°C (1/2" inlet, 1/2" outlet)
Noise level: 50dBA - 3m
Water connection: 3/4" BSP (minimum water pressure 2bar, maximum 6bar)
Water quality: Potable: Ph range between 6.5 and 9.5 (please inform us if supply is demineralized)
Drain: 1 in ø. (Ziegra recommends installation of a floor drain with grate)
Fuse: 13A
Cable cross section: 1.5mm2, Cu.
         
Machine Connections
ice machine connections

A. Operating Switch
D. Electric cable/plug
E. Water connection hose (supplied)
F. Overflow
G. Filter - Ziegra single (supplied)
H. Stop valve
J. Electrical supply

Water cooled machine only
O. Cooling water inlet
P. Cooling water outlet

Weight of machine. 80kg
Total weight with bin. 145kg

 

Dimensions
ice machine dimensions
 
Available Ice Types
The ZBE150 can make either of the ice types below, simply state on the order which type of ice you require. The ice type does not effect the price. Click on an image for details and images of each ice type.
Micro flake ice
Midi flake ice
 
micro flake ice midi flake ice
Very small flakes of ice, sometimes known as 'crushed ice'. The gentlest type of ice for packing delicate products and also where rapid cooling is required.

Medium sized flakes of ice.

 
     
Included with machine
Ziegra single water filtration kit
ice machine water filter

The Ziegra single water filtration unit helps prevent the water related problems that can impair the efficiency, reliablity and longevity of any ice machine.

Helps prevent the ingress of dirt and dissolved minerals which can coat evaporation surfaces, block lines and jam valves.

Water connection hose (part # 970221124)
ice machine water connection hose
Water inlet hose to connect from the outlet of the Ziegra single water filter and the water inlet of the ice machine.
Large ice scoop
large poly moulded ice scoop
A large polymer scoop for hygienic handling of the ice.
 
 
Other options
Auto drain down and flushing system
water flushing system
Every Ziegra ice machine has as standard a sealed water system for maximum possible water hygiene. However for applications where hygiene is a high priority, additonal systems can be fitted. Auto water drain down empties the water reservoir every time the machine is switched off, thus preventing water from stagnating in the tank. Auto water drain down is available separately or with an additional auto flushing system. This system can be pre-set to automatically flush through the water system with clean water at intervals pre-determined by the customer.
Smartcart 240
insulated ice transport cart
109kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene.
Smartcart 125
insulated wheeled ice buggy with lid
57kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. With integrated hinged lid.
Large polymer ice shovel (white)
large poly ice shovel
One piece moulded ice shovel in white for the hygienic and rapid shovelling of large quantities of ice
Upgrade to castor mounting
ice machine on castors

Machine mounted on stainless steel castors instead of legs. Two of the castors are swivel and two are braked swivel. The wheel is white nylon with a plain bearing. The machine is easily moved for cleaning purposes.

Overall Height : 156mm
Wheel Size : 125mm

 

 

Ziegra Ice Machines (UK) Ltd

Tel: 0844 8808055

 
Ziegra Ice Machines (UK) Ltd
Unit 2, Phoenix Court, Hammond Avenue, Stockport, Cheshire, SK4 1PQ
Tel:0844 8808055   Fax: 0161 480 7927   Email: ice@ziegra.co.uk

Specialists in...
Ice Production, Storage, Handling
and Dosing Systems