The ZBE30-10 consists of a 30kg icemaker with an integrated 10kg insulated storage unit. The ice machine is a plug in unit and requires only connection to water and mains power supply. It is continuously rated and works fully automatically. No moving parts in the refrigeration circuit of the evaporator, hence no leaks due to rotating seals. The ZBE30-10 is our smallest laboratory ice machine and is ideal for benchtop mounting
|
 |
||
Specifications
|
|||
| Cabinet: | Stainless steel | ||
| Warranty: | 2 years | ||
| Ice production (24hours): | 30kg (guaranteed at 20°C air and 15°C water) | ||
| Ice storage | 10kg | ||
| Condenser: | Air cooled (water cooling available on request) | ||
| Voltage: | 240-1-50Hz | ||
| Control voltage: | 240-1-50Hz | ||
| Machine weight: | 60kg | ||
| Shipping dimensions: (wxdxh) | 0.43 x 0.55 x 0.8m | ||
| Shipping weight: | 70kg | ||
| Power consumption: | 0.4kW | ||
| Current consumption: | 2.5A | ||
| Refrigerant: | R404A (0.6kg) | ||
| Heat emission: | 0.42kW | ||
| Noise level: | 45dBA - 3m | ||
| Water connection: | 3/4" BSP | ||
| Water supply required (site): | 15mm copper or plastic terminating in a 3/4" BSP fitting, minimum water pressure 2bar, maximum 6bar Potable: Ph range between 6.5 and 9.5 | ||
| Overflow: | 14mm ø. | ||
| Fuse: | 13A | ||
| Cable cross section: | 1.5 mm2, Cu. | ||
 |
|||
Machine connections and dimensions |
|||
 |
 |
D. Electric cable/plug Weight of machine. 60kg |
|
Available Ice Types |
|||
|---|---|---|---|
| The ZBE30-10 can make either of the ice types below, simply state on the order which type of ice you require. The ice type does not effect the price. Click on an image for details and images of each ice type. | |||
Micro flake ice |
Midi flake ice |
||
 |
 |
|
|
| Very small flakes of ice, sometimes known as 'crushed ice'. The gentlest type of ice for packing delicate products and also where rapid cooling is required. | Medium sized flakes of ice. Sometimes known as 'granular ice'. |
||
Included with machine |
|
 |
|
The Ziegra single helps prevent the water related problems that can impair the efficiency, reliablity and longevity of any ice machine. Helps prevent the ingress of dirt and dissolved minerals which can coat evaporation surfaces, block lines and jam valves. |
|
| Water connection hose (part # 970221124) |  |
| Water inlet hose to connect from the outlet of the Ziegra single water filter and the water inlet of the ice machine. | |
| Small ice scoop |  |
| A small polymer scoop for hygienic handling of the ice. | |
Options |
|
Drain Pump (part # ZUK9700011) |
 |
| A pump to assist meltwater drain when the room drain is lower than or at the same level as the drain on the bin. Often used in Laboratory installations. | |
|
|
Ziegra Ice Machines (UK) Ltd Unit 2, Phoenix Court, Hammond Avenue, Stockport, Cheshire, SK4 1PQ Tel:0844 8808055 Fax: 0161 480 7927 Email: ice@ziegra.co.uk |