ZBE375T-BK200 flake ice machine and storage
 
375kg tropical ice machine on bin and cart storage system picture

The ZBE375T-BK200 consists of a ZBE375T tropical ice machine on top of a BK200 elevated bin and cart ice storage system.

The unit operates automatically, stopping when the bin is full and re-starting when ice is removed.

The BK200 ice storage is an elevated bin and cart system which has gravity assisted ice removal and castered cart to deliver substantial labour and safety benefits. The bin is poly lined for maximum scale and chlorine resistance and bin access via SmartGATE with powerhinge door. Exterior finish is stainless steel and the insulated ice cart is a hygienic moulded polyethylene with a removeable poly lid.

This type of flake ice is made at -0.5°C so will not freeze together, making it ideal where no refrigerated storage is available.

The ice machine is a plug in unit and requires only connection to water and mains power supply. It is continuously rated and works fully automatically. No moving parts in the refrigeration circuit of the evaporator, hence no leaks due to rotating seals.

The hygienic sealed water system, boxed in construction and stainless steel panels makes this machine ideal for installation in factory environments where safety and hygiene are of paramount importance, especially when people may be working around the machine.

Each unit comes complete with bin, base, cart with lid and ice paddle.

         
Specifications
Cabinet: Stainless steel
Warranty: 2 years
Ice production (24hours): 375kg (guaranteed at 20°C air and 15°C water)
Ice storage 200kg + cart (109kg)
Voltage: 240-1-50Hz (400-3-50Hz on request)
Control voltage: 240-1-50Hz
Shipping dimensions: (wxdxh) 3 pieces: (1.32 x 0.91 x 1.1m) + (1.32 x 0.91 x 1.22m) + (0.76 x 0.66 x 0.79m)
Shipping weight: 3 pieces: 96kg + 91kg + 105kg
Power consumption: 1.7kW
Current consumption: 7.5 A
Refrigerant: R404A (1.2kg)
Air-cooled condenser (standard) 1,400 m3 / hour
Water-cooled condenser (option) 200 l / hour at 15°C (1/2" inlet, 1/2" outlet)
Heat emission: 2.6kW
Noise level: 55dBA - 3m
Water connection: 3/4" BSP (minimum water pressure 2bar, maximum 6bar)
Water quality: Potable: Ph range between 6.5 and 9.5 (please inform us if supply is demineralized)
Overflow: 14mm ø.
Fuse: 13A
Cable cross section: 1.5mm2, Cu.
       
Connections
ice machine connection

A. Operating Switch
D. Electric cable/plug
E. Water connection hose (supplied)
F. Overflow
G. Filter - Ziegra single (supplied)
H. Stop valve
J. Electrical supply

Water cooled machine only
O. Cooling water inlet
P. Cooling water outlet

Weight of machine. 90kg
Total weight with bin. 293kg

Dimensions
375kg tropical ice machine on bin and cart system dimensions

 

 
Available Ice Types
The ZBE375T can make either of the ice types below, simply state on the order which type of ice you require. The ice type does not effect the price. Click on an image for details and images of each ice type.
MicroIce
MidiIce
 
micro ice small ice flake midi ice medium ice flake
Very small chips of ice, sometimes known as 'crushed ice'. The gentlest type of ice for packing delicate products and also where rapid cooling is required.

Medium sized chips of ice. Sometimes known as 'flake ice'.

 
 
Included with machine
Ziegra single water filtration kit
ziegra single water filtration for small ice machines

The Ziegra single water filtration unit helps prevent the water related problems that can impair the efficiency, reliablity and longevity of any ice machine.

Helps prevent the ingress of dirt and dissolved minerals which can coat evaporation surfaces, block lines and jam valves.

Water connection hose (part # 970221124)
water connection hose for ice machine
Water inlet hose to connect from the outlet of the Ziegra single water filter and the water inlet of the ice machine.
Large ice scoop
plastic ice scoop
A large polymer scoop for hygienic handling of the ice.
1 x Smartcart 240
Smartcart 240 ice transport cart
109kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene.
 
 
Other options
Remote weatherproof or saltwater resistant condenser
Remote condenser
A standard packaged ice machine has the condenser built into it. This is fine in enviroments that are cool and well ventilated, with clean air, however for environments that get hot, dusty or do not have very good ventilation a remote condenser mounted outside the building is the solution. Remote machines must only be professionally installed by persons qualified to do so. Remote condensers come weatherproofed as standard for outside installation, however for applications close to the sea, saltwater resistant Cu/Cu condensers are recommended.
Auto drain down and flushing system
water flushing system
Every Ziegra ice machine has as standard a sealed water system for maximum possible water hygiene. However for applications where hygiene is a high priority, additonal systems can be fitted. Auto water drain down empties the water resovoir every time the machine is switched off, preventing water from stagnating in the tank. Auto water drain down is available separately or with an additional auto flushing system. This system can be pre-set to automatically flush through the water system with clean water at intervals pre-determined by the customer.
Extra Smartcart 240
Smartcart 240 ice transport cart
109kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. Also available a set of six totes to fit inside the cart, 11kg capacity each to make applying ice a little easier on the back.
 
 

 

Ziegra Ice Machines (UK) Ltd

Tel: 0844 8808055

 
Ziegra Ice Machines (UK) Ltd
Unit 2, Phoenix Court, Hammond Avenue, Stockport, Cheshire, SK4 1PQ
Tel:0844 8808055   Fax: 0161 480 7927   Email: ice@ziegra.co.uk

Specialists in...
Ice Production, Storage, Handling
and Dosing Systems