The ZBE700-2-SG500 consists of 2 x ZBE350 chip type flake ice machines on top of an SG500 ice storage unit. The unit operates automatically, stopping when the bin is full and re-starting when ice is removed. This type of flake ice is made at -0.5°C so will not freeze together, making it ideal where no refrigerated storage is available. The ice machines are plug in units and require only connection to water and mains power supply. They are continuously rated and work fully automatically. No moving parts in the refrigeration circuit of the evaporator, hence no leaks due to rotating seals. The bin is of an upright design and features the unique SmartGate door access system. This system positively controls the flow of ice to the door snout area, thus reducing spillage and also ensures that the first ice in is the first ice out, eliminating hygiene problems due to stale ice in the bottom of the bin. The construction is of welded steel shell and frame with a stainless steel exterior finish. The bin has non-corroding, seamless polyethylene liner inside. Insulation is non-CFC polyurethane foam, bonded to shell and liner for added strength. The lower door assembly has a poly lift door with PowerHinge to eliminte gaskets and latches. The entire lower door assembly can be removed with three screws for installation through narrow doorways. Upper inspection doors are double wall poly to increase durability and minimise melt losses and condensation. Legs are adjustable from 152mm to 191mm. Bin drain 1” FPT rigid PVC. |
|||
Ice machine specifications
|
|||
| Cabinet: | Stainless steel | ||
| Warranty: | 2 years | ||
| Ice production (24hours): | 2 x 350kg (guaranteed at 20°C air and 15°C water) | ||
| Ice storage | 500kg | ||
| Voltage: | 240-1-50Hz | ||
| Control voltage: | 240-1-50Hz | ||
| Shipping dimensions: (wxdxh) | 3 pieces: (0.76 x 0.66 x 0.79m) + (0.76 x 0.66 x 0.79m) + (1.08 x 1.65 x 1.64m) | ||
| Shipping weight: | 3 pieces: 105kg + 105kg + 160kg | ||
| Power consumption: | 2 x 1.6kW | ||
| Current consumption: | 2 x 7.3A | ||
| Refrigerant: | R404A (2 x 1.2kg) | ||
| Air-cooled condensers (standard) | 2 x 1,400 m3 / hour | ||
| Water-cooled condensers (option) | 2 x 160 l / hour at 15°C (2each 1/2" inlet, 1/2" outlet) | ||
| Heat emission: | 2 x 2.6kW | ||
| Noise level: | 2 x 55dBA - 3m | ||
| Water connection: | 2 x 3/4" BSP (minimum water pressure 2bar, maximum 6bar) | ||
| Water quality: | Potable: Ph range between 6.5 and 9.5 (please inform us if supply is demineralized) | ||
| Drain: | 1 in ø. (Ziegra recommends installation of a floor drain with grate) | ||
| Fuse: | 2 x 13A | ||
| Cable cross section: | 2 x 1.5mm2, Cu. | ||
 |
|||
Ice machine connections (each machine)
|
|||
 |
A. Operating Switch Weight of machine. 90kg |
|
|
Ice machine dimensions |
||
|---|---|---|
 |
||
Available Ice Types |
||
| The ZBE350 can make either of the ice types below, simply state on the order which type of ice you require. The ice type does not effect the price. Click on an image for details and images of each ice type. | ||
 |
 |
|
| Very small flakes of ice, sometimes known as 'crushed ice'. The gentlest type of ice for packing delicate products and also where rapid cooling is required. | Medium sized flakes of ice. |
|
| Included with ice machines | |
| Ziegra triple water filtration kit |  |
The Ziegra triple water filtration unit helps prevent the water related problems that can impair the efficiency, reliablity and longevity of any ice machine. Helps prevent the ingress of dirt and dissolved minerals which can coat evaporation surfaces, block lines and jam valves. |
|
| Water connection hose (part # 970221124) |  |
| Water inlet hose to connect from the outlet of the Ziegra single water filter and the water inlet of the ice machine. | |
| Large polymer ice shovel (white) |  |
| One piece moulded ice shovel in white for the hygienic and rapid shovelling of large quantities of ice | |
Other options
|
|
Remote weatherproof or saltwater resistant condenser |
 |
| A standard packaged ice machine has the condenser built into it. This is fine in enviroments that are cool and well ventilated, with clean air, however for environments that get hot, dusty or do not have very good ventilation a remote condenser mounted outside the building is the solution. Remote machines must only be professionally installed by persons qualified to do so. Remote condensers come weatherproofed as standard for outside installation, however for applications close to the sea, saltwater resistant Cu/Cu condensers are recommended. | |
Auto drain down and flushing system |
 |
| Every Ziegra ice machine has as standard a sealed water system for maximum possible water hygiene. However for applications where hygiene is a high priority, additonal systems can be fitted. Auto water drain down empties the water resovoir every time the machine is switched off, preventing water from stagnating in the tank. Auto water drain down is available separately or with an additional auto flushing system. This system can be pre-set to automatically flush through the water system with clean water at intervals pre-determined by the customer. | |
 |
|
109kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. Also available a set of six totes to fit inside the cart, 11kg capacity each to make applying ice a little easier on the back. |
|
| Smartcart 125 |  |
| 57kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. With integrated hinged lid. | |
| Upgrade to castor mounting |  |
Machine mounted on B.Z.P. corrosion resistant castors instead of legs. Two of the castors are swivel and two are braked swivel. The wheel is white nylon with a ball bearing. The machine is easily moved for cleaning purposes. Overall Height : 197mm |
|
Ziegra Ice Machines (UK) Ltd Unit 2, Phoenix Court, Hammond Avenue, Stockport, Cheshire, SK4 1PQ Tel:0844 8808055 Fax: 0161 480 7927 Email: ice@ziegra.co.uk |