ZBE750-SG500 ice machine (standard and tropical versions)
 

The ZBE750-SG500 consists of a ZBE750 ice machine, installed on top of an SG500 capacity smartgate ice storage bin.

Standard model guaranteed at 20°C air, 15°C water

Tropical model guaranteed at 35°C air, 25°C water

This type of flake ice is made at -0.5°C so will not freeze together, making it ideal where no refrigerated storage is available.

It is a plug in unit and requires only connection to water and mains power supply. The machine stops automatically when the bin is full of ice and re-starts automatically when ice is removed from the bin.

The hygienic sealed water system, boxed in construction and stainless steel panels makes this machine ideal for installation in factory environments where safety and hygiene are of paramount importance, especially when people may be working around the machine.

The bin is of an upright design and features the unique SmartGate door access system. This system positively controls the flow of ice to the door snout area, thus reducing spillage and also ensures that the first ice in is the first ice out, eliminating hygiene problems due to stale ice in the bottom of the bin. The construction is of welded steel shell and frame with a stainless steel exterior finish.

The bin has non-corroding, seamless polyethylene liner inside. Insulation is non-CFC polyurethane foam, bonded to shell and liner for added strength. The lower door assembly has a poly lift door with PowerHinge to eliminte gaskets and latches. The entire lower door assembly can be removed with three screws for installation through narrow doorways. Upper inspection doors are double wall poly to increase durability and minimise melt losses and condensation. Legs are adjustable from 152mm to 191mm. Bin drain 1” FPT rigid PVC.

 
Ice machine specifications
Cabinet: Stainless steel
Warranty: 2 years
Ice production (24hours): 750kg
Ice storage 500kg
Voltage: 400-3-50Hz
Control voltage: 240-1-50Hz
Shipping dimensions: (wxdxh) 2 pieces: (1.08 x 1.65 x 1.64m) + (0.87 x 0.73 x 1.0m)
Shipping weight: 2 pieces: 157kg + 160kg
Power consumption: 2.7kW standard (3.1kW tropical)
Current consumption: 6.2A standard (7.2A tropical)
Refrigerant: R404A (1.8kg)
Air-cooled condenser (standard) 2,500m3 / hour (2,900m3 tropical)
Water-cooled condenser (option) 270l / hour at 15°C (25°C tropical) - 1/2" inlet, 1/2" outlet
Heat emission: 5.5kW standard (6.4kW tropical)
Noise level: 60dBA - 3m
Water connection: 3/4" BSP (minimum water pressure 2bar, maximum 6bar)
Water quality: Potable: Ph range between 6.5 and 9.5 (please inform us if supply is demineralized)
Drain: 1 in ø. (Ziegra recommends installation of a floor drain with grate)
Fuse: 20A
Cable cross section: 2.5mm2, Cu.
 
Ice machine connections

A. Control Panel
C. Ice hose
D. Electric cable/plug
E. Water connection
F. Overflow
G. Filter
H. Stop valve
J. Fuses

Weight of ice machine. 145kg
Weight of ice machine with bin. 300kg

 

Ice machine dimensions
750kg ice machine dimensions
 
Available Ice Types
The ZBE750 ice machine can make any one of the ice types below, simply state on the order which type of ice you require. The ice type does not effect the price. Click on an image for details and images of each ice type.
Micro flake Ice
Midi flake Ice
Macro flake Ice
 
micro flake ice
midi flake ice
macro flake ice
Very small flakes of ice, sometimes known as 'crushed ice'. The gentlest type of ice for packing delicate products and also where rapid cooling is required.

Medium sized flakes of ice.

Large sized flakes of ice. The large, thick pieces ensure long life in warm environments.  
 
Included with ice machine
Ziegra triple water filtration unit
Ziegra triple water filter

The Ziegra triple water filtration unit helps prevent the water related problems that can impair the efficiency, reliablity and longevity of any ice machine.

Helps prevent the ingress of dirt and dissolved minerals which can coat evaporation surfaces, block lines and jam valves.

Water connection hose (part # 970221124)
ice machine water hose
Water inlet hose to connect from the outlet of the Ziegra triple water filter and the water inlet of the ice machine.
Large polymer ice shovel (white)
ice shovel
One piece moulded ice shovel in white for the hygienic and rapid shovelling of large quantities of ice
 
 
Other options
Remote weatherproof or saltwater resistant condenser
ice machine remote condenser
A standard packaged ice machine has the condenser built into it. This is fine in enviroments that are cool and well ventilated, with clean air, however for environments that get hot, dusty or do not have very good ventilation a remote condenser mounted outside the building is the solution. Remote machines must only be professionally installed by persons qualified to do so. Remote condensers come weatherproofed as standard for outside installation, however for applications close to the sea, saltwater resistant Cu/Cu condensers are recommended.
Auto drain down and flushing system
ice maker diagram
Every Ziegra ice machine has as standard a sealed water system for maximum possible water hygiene. However for applications where hygiene is a high priority, additonal systems can be fitted. Auto water drain down empties the water resovoir every time the machine is switched off, preventing water from stagnating in the tank. Auto water drain down is available separately or with an additional auto flushing system. This system can be pre-set to automatically flush through the water system with clean water at intervals pre-determined by the customer.
Smartcart 240 ice transport cart
109kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. Also available a set of six totes to fit inside the cart, 11kg capacity each to make applying ice a little easier on the back.
Smartcart 125
57kg polymer moulded ice transport cart
57kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. With integrated hinged lid.
Upgrade to castor mounting
castor mounted ice machine with storage

Machine mounted on B.Z.P. corrosion resistant castors instead of legs. Two of the castors are swivel and two are braked swivel. The wheel is white nylon with a ball bearing. The machine is easily moved for cleaning purposes.

Overall Height : 197mm
Wheel Size : 150mm

 

 

Ziegra Ice Machines (UK) Ltd

Tel: 0844 8808055

 
Ziegra Ice Machines (UK) Ltd
Unit 2, Phoenix Court, Hammond Avenue, Stockport, Cheshire, SK4 1PQ
Tel:0844 8808055   Fax: 0161 480 7927   Email: ice@ziegra.co.uk

Specialists in...
Ice Production, Storage, Handling
and Dosing Systems