ZNE125-BK150 nugget ice machine with storage
 
nugget ice machine with storage

The ZNE125-BK150 consists of a ZNE125 nugget ice machine on top of an BK150 bin and cart system.

The ice machine is a plug in unit and requires only connection to water and mains power supply. It is continuously rated and works fully automatically. No moving parts in the refrigeration circuit of the evaporator, hence no leaks due to rotating seals.

The hygienic sealed water system, boxed in construction and stainless steel panels makes this machine ideal for installation in factory environments where safety and hygiene are of paramount importance, especially when people may be working around the machine.

The BK ice storage is an elevated bin and cart system which has gravity assisted ice removal and castered cart to deliver substantial labour and safety benefits. The BK is poly lined for maximum scale and chlorine resistance and bin access via sliding door. Exterior finish is stainless steel and the insulated ice cart is a hygienic moulded polyethylene with a removeable poly lid.

Each unit comes complete with bin, base, cart with lid and ice paddle.

 
Ice machine specifications
Cabinet: Stainless steel
Ice production (24hours): 125kg (guaranteed at 20°C air and 15°C water)
Ice storage 150kg + cart (109kg)
Condenser: Air cooled (water cooling available on request)
Voltage: 240-1-50Hz
Control voltage: 240-1-50Hz
Shipping dimensions: (wxdxh) 3 pieces: (1.32 x 0.91 x 0.75m) + (1.32 x 0.91 x 1.22m) + (0.76 x 0.66 x 0.79)
Shipping weight: 3 pieces: 75kg + 91kg + 95kg
Power consumption: 0.7kW
Current consumption: 4.6A
Refrigerant: R404A (1.2kg)
Heat emission: 1.3kW
Noise level: 51dBA - 3m
Water connection: 3/4" BSP (minimum water pressure 2bar, maximum 6bar)
Overflow: 14mm ø.
Fuse: 13A
Cable cross section: 1.5mm2, Cu.
 
Ice machine connections
nugget ice machine connections

A. Operating Switch
D. Electric cable/plug
E. Water connection
F. Overflow
G. Filter
H. Stop valve
J. Fuses

Weight of ice machine. 70kg
Total weight with bin. 273kg

Ice machine dimensions
nugget ice machine on bin and cart system dimensions
Available Ice Types
The ZNE125 makes nugget ice, for more pictures and information about this ice type, please click on the link below.
 
Nugget ice    
A very versatile type of ice which can be used in both drinks and on food displays, making it ideal for the food service sector.

 

 
Included with ice machine
ice machine water filter

Highly effective, particularly in hard water areas, the Ziegra single helps prevent the water related problems that can impair the efficiency, reliablity and longevity of any ice machine.

Helps prevent the ingress of dirt and dissolved minerals which can coat evaporation surfaces, block lines and jam valves.

Options
Auto drain down and flushing system
ice maker diagram
Every Ziegra ice machine has as standard a sealed water system for maximum possible water hygiene. However for applications where hygiene is a high priority, additonal systems can be fitted. Auto water drain down empties the water resovoir every time the machine is switched off, preventing water from stagnating in the tank. Auto water drain down is available separately or with an additional auto flushing system. This system can be pre-set to automatically flush through the water system with clean water at intervals pre-determined by the customer.
ice totesice cart
109kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. Also available a set of six totes to fit inside the cart, 11kg capacity each to make applying ice a little easier on the back.

 

Ziegra Ice Machines (UK) Ltd

Tel: 0844 8808055

 
Ziegra Ice Machines (UK) Ltd
Unit 2, Phoenix Court, Hammond Avenue, Stockport, Cheshire, SK4 1PQ
Tel:0844 8808055   Fax: 0161 480 7927   Email: ice@ziegra.co.uk

Specialists in...
Ice Production, Storage, Handling
and Dosing Systems