 |
The ZNE125-S130 consists of a ZNE125 nugget ice machine on top of an S130 slope fronted, insulated ice storage bin. The ice machine is a plug in unit and requires only connection to water and mains power supply. It is continuously rated and works fully automatically. No moving parts in the refrigeration circuit of the evaporator, hence no leaks due to rotating seals. The hygienic sealed water system, boxed in construction and stainless steel panels makes this machine ideal for installation in factory environments where safety and hygiene are of paramount importance, especially when people may be working around the machine. The bin is of a slope fronted design and construction is of welded steel shell and frame. Exterior finish is stainless steel front, top and sides with galvanised steel back and bottom. The bin has non-corroding polyethylene liner inside. Insulation is non-CFC
polyurethane foam, bonded to shell and liner for added strength. Lift door has a stainless steel exterior and
ABS interior, bonded together with non-CFC polyurethane foam for extra rigidity and strength. A
conveniently low door sill height allows easy access to ice in the bottom of the bin. Door opening to be
sealed with fully replaceable gasketing. Legs adjustable from 152mm to 191mm. Bin drain 1” FPT rigid PVC. |
|||
Ice machine specifications
|
||||
| Cabinet: | Stainless steel | |||
| Ice production (24hours): | 125kg (guaranteed at 20°C air and 15°C water) | |||
| Ice storage | 130kg (0.39m3) | |||
| Condenser: | Air cooled (water cooling available on request) | |||
| Voltage: | 240-1-50Hz | |||
| Control voltage: | 240-1-50Hz | |||
| Shipping dimensions: (wxdxh) | 0.84 x 0.92 x 1.73m | |||
| Shipping weight: | 150kg | |||
| Power consumption: | 0.7kW | |||
| Current consumption: | 4.6A | |||
| Refrigerant: | R404A (1.2kg) | |||
| Heat emission: | 1.3kW | |||
| Noise level: | 50dBA - 3m | |||
| Water connection: | 3/4" BSP (minimum water pressure 2bar, maximum 6bar) | |||
| Drain: | 1 in ø. (Ziegra recommends installation of a floor drain with grate) | |||
| Fuse: | 13A | |||
| Cable cross section: | 1.5mm2, Cu. | |||
Ice machine connections
|
||||
 |
A. Operating Switch Weight of ice machine. 70kg |
|
||
Ice machine dimensions |
||
|---|---|---|
 |
||
Available Ice Types |
||
| The ZNE125 makes nugget ice, for more pictures and information about this ice type, please click on the link below. | ||
 |
 |
|
| A very versatile type of ice which can be used in both drinks and on food displays, making it ideal for the food service sector. |
|
|
| Included with ice machine | |
| Ziegra single water filtration kit |  |
The Ziegra single helps prevent the water related problems that can impair the efficiency, reliablity and longevity of any ice machine. Helps prevent the ingress of dirt and dissolved minerals which can coat evaporation surfaces, block lines and jam valves. |
|
Other options
|
|
Auto drain down and flushing system |
 |
Every Ziegra ice machine has as standard a sealed water system for maximum possible water hygiene. However for applications where hygiene is a high priority, additonal systems can be fitted. Auto water drain down empties the water resovoir every time the machine is switched off, preventing water from stagnating in the tank. Auto water drain down is available separately or with an additional auto flushing system. This system can be pre-set to automatically flush through the water system with clean water at intervals pre-determined by the customer. |
|
  |
|
109kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. Also available a set of six totes to fit inside the cart, 11kg capacity each to make applying ice a little easier on the back. |
|
Ziegra Ice Machines (UK) Ltd Unit 2, Phoenix Court, Hammond Avenue, Stockport, Cheshire, SK4 1PQ Tel:0844 8808055 Fax: 0161 480 7927 Email: ice@ziegra.co.uk |