|
The construction of the SG200 is of welded steel shell and frame. The exterior finish is stainless steel front, top, sides, back and bottom. The bin has poly walls and a stainless steel bottom inside. Insulation is non-CFC polyurethane foam, bonded to shell and liner for added strength. Lower door assembly has non-corroding poly snout, poly lift door with PowerHinge to eliminate gasket and latches and inner SmartGate to positively control ice flow into the snout area and reduce spillage. The entire lower door assembly can be eailty removed by removing three screws for installation through narrow doors. Upper inspection doors to be double-wall poly to increase durablity and minimize meltage and condensation. Legs adjustable from 152mm to 191mm. The bin drain is 26mm FPT ridid PVC The bin is NSF listed and comes complete with a large ice scoop in hygienic plastic. |
|||
Specifications
|
||||
| Cabinet: | Stainless steel | |||
| Internal finish | Polyethylene walls, stainless steel bottom. | |||
| Ice storage capacity | 200kg (0.61m3) | |||
| Drain: | 1 in ø. (Ziegra recommends installation of a floor drain with grate) | |||
| Weight of unit: | 114kg | |||
| For ice machines: | ZBE150 to ZBE375T | |||
Bin Dimensions |
||||
 |
||||
| Options | |
 |
|
57kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. With integrated hinged lid. |
|
 |
|
| Add additional Smartcarts to your ITS system so that while two are being filled, others can be left where the ice is being used. Ideal if the system is to service multiple locations | |
| Drain Pump (part # ZUK9700011) |  |
| A pump to assist meltwater drain when the room drain is lower than or at the same level as the drain on the bin. | |
Ziegra Ice Machines (UK) Ltd Unit 2, Phoenix Court, Hammond Avenue, Stockport, Cheshire, SK4 1PQ Tel:0844 8808055 Fax: 0161 480 7927 Email: ice@ziegra.co.uk |
