3.0 tonne ice machine

UBE3.000 flake ice machine (standard and tropical versions)

	The UBE3.000 is a 3 tonne chip type flake ice machine with a choice of three different sizes of chip or flake. The machine is packaged, which means it includes the refrigeration, icemaker and controls in one compact unit so installation requires only the connection of utilities and ice pipe/level control. Standard model guaranteed at 20°C air, 15°C water Tropical model guaranteed at 35°C air, 25°C water The hygienic sealed water system and boxed in construction makes this machine ideal for installation in factory environments where people may be working around the machine. It is continuously rated and works fully automatically. No moving parts in the refrigeration circuit of the evaporator, hence no leaks due to rotating seals. Chip type flake ice is made at -0.5°C so will not freeze together, making it ideal where no refrigerated storage is available.

UBE3.000 flake ice machine (standard and tropical versions)

The UBE3.000 is a 3 tonne chip type flake ice machine with a choice of three different sizes of chip or flake. The machine is packaged, which means it includes the refrigeration, icemaker and controls in one compact unit so installation requires only the connection of utilities and ice pipe/level control.

Standard model guaranteed at 20°C air, 15°C water

Tropical model guaranteed at 35°C air, 25°C water

The hygienic sealed water system and boxed in construction makes this machine ideal for installation in factory environments where people may be working around the machine.

It is continuously rated and works fully automatically. No moving parts in the refrigeration circuit of the evaporator, hence no leaks due to rotating seals.

Chip type flake ice is made at -0.5°C so will not freeze together, making it ideal where no refrigerated storage is available.


Specifications
Frame and panels:	Powder coated
Warranty:	1 year
Ice production (24hours):	3,000kg
Voltage:	400-3-50Hz
Control voltage:	240-1-50Hz
Machine Weight:	800kg (850kg)
Shipping dimensions (wxdxh):	1.53 x 1.63 x 1.63m
Shipping weight:	950kg (1,000kg)
Power consumption:	10.5kW (12kW)
Current consumption:	21A (24A)
Refrigerant:	R404A 9.0kg)
Air-cooled condenser (standard)	airflow upwards, air volume 6,500 m³ / hour (13,900 m³ /hour
Water-cooled condenser (option)	on request
Heat emission:	22kW
Noise level:	70dBA - 3m
Water connection:	1/2"
Water supply required (site):	15mm copper or plastic with 3/4" BSP fitting, minimum water pressure 2bar, maximum 5bar Potable: Ph range between 6.5 and 9.5
Overflow:	14mm
Fuse:	50A - Slow (63A - slow tropical) or equivalent D rated trip
Cable cross section:	10mm2 Cu

Specifications

Frame and panels:

Powder coated

Warranty:

1 year

Ice production (24hours):

3,000kg

Voltage:

400-3-50Hz

Control voltage:

240-1-50Hz

Machine Weight:

800kg (850kg)

Shipping dimensions (wxdxh):

1.53 x 1.63 x 1.63m

Shipping weight:

950kg (1,000kg)

Power consumption:

10.5kW (12kW)

Current consumption:

21A (24A)

Refrigerant:

R404A 9.0kg)

Air-cooled condenser (standard)

airflow upwards, air volume 6,500 m³ / hour (13,900 m³ /hour

Water-cooled condenser (option)

on request

Heat emission:

22kW

Noise level:

70dBA - 3m

Water connection:

1/2"

Water supply required (site):

15mm copper or plastic with 3/4" BSP fitting, minimum water pressure 2bar, maximum 5bar Potable: Ph range between 6.5 and 9.5

Overflow:

14mm

Fuse:

50A - Slow (63A - slow tropical) or equivalent D rated trip

Cable cross section:

10mm2 Cu


Dimensions

Dimensions


Ice types available
The UBE3.500-2 can make any one of the ice types below, simply state on the order which type of ice you require. The ice type does not effect the price. Click on an image for details and images of each ice type.
MicroIce	MidiIce	MacroIce

Very small chips of ice, sometimes known as 'crushed ice'. The gentlest type of ice for packing delicate products and also where rapid cooling is required.	Medium sized chips of ice. Sometimes known as 'flake ice'.	Large sized chips of ice. Sometimes known as 'flake ice'. The large, thick pieces ensure long life in warm environments.

Ice types available

The UBE3.500-2 can make any one of the ice types below, simply state on the order which type of ice you require. The ice type does not effect the price. Click on an image for details and images of each ice type.

MicroIce

MidiIce

MacroIce

Very small chips of ice, sometimes known as 'crushed ice'. The gentlest type of ice for packing delicate products and also where rapid cooling is required.

Medium sized chips of ice. Sometimes known as 'flake ice'.

Large sized chips of ice. Sometimes known as 'flake ice'. The large, thick pieces ensure long life in warm environments.


Ice discharge options
To make installation of a machine easy, there are several ice discharge options for this machine. Simply select the one that best matches your installation requirements. Choice of ice discharge does not effect the price.
Type K	Type L	Type M

Type R	Type S	Type T

Ice discharge options

To make installation of a machine easy, there are several ice discharge options for this machine. Simply select the one that best matches your installation requirements. Choice of ice discharge does not effect the price.

Type K

Type L

Type M

Type R

Type S

Type T


Included with machine
Ziegra triple water fitration kit
The Ziegra triple water filtration unit helps prevent the water related problems that can impair the efficiency, reliablity and longevity of any ice machine. Helps prevent the ingress of dirt and dissolved minerals which can coat evaporation surfaces, block lines and jam valves.
Large ice scoop
A large polymer scoop for hygienic handling of the ice.

Other options
Water connection hose (part # 970221124)
If you are self installing, you will need two water hoses, one to connect from the water supply to the inlet of the supplied Ziegra triple water filter and the other from the water outlet of the triple to the inlet of the ice machine. You will also need a 1/2" to 3/4" adaptor bush.
Remote weatherproof and saltwater resistant condenser
A standard packaged ice machine has the condenser built into it. This is fine in enviroments that are cool and well ventilated, with clean air, however for environments that get hot, dusty or do not have very good ventilation a remote condenser mounted outside the building is the solution. Remote machines must only be professionally installed by persons qualified to do so. Remote condensers come weatherproofed as standard for outside installation, however for applications close to the sea, saltwater resistant Cu/Cu condensers are recommended.
Remote ice maker
For applications where space is limited the icemaker and refrigeration unit can be separate. The icemaker is mounted close to where the ice is needed, while the refrigeration components are mounted in a more suitable remote location, often outside. Also useful for installation into areas where access is limited and fitting a larger unit would be more difficult.
Upgrade to stainless steel frame and panels
Recommended in production environments when hygiene is of paramount importance. Also when the machine may be subject to corrossion due to lots of water and/or salt.

Auto flush cleaning system
Every Ziegra ice machine has as standard a sealed water system for maximum possible water hygiene. However for applications where hygiene is a high priority, additonal systems can be fitted. Auto water drain down empties the water resovoir every time the machine is switched off, preventing water from stagnating in the tank. Auto water drain down is available separately or with an additional auto flushing system. This system can be pre-set to automatically flush through the water system with clean water at intervals pre-determined by the customer.
Smartcart 240
109kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. Also available a set of six totes to fit inside the cart, 11kg capacity each to make applying ice a little easier on the back.
Smartcart 125
57kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. With integrated hinged lid.
Large polymer ice shovel (white)
One piece moulded ice shovel in white for the hygienic and rapid shovelling of large quantities of ice
Plant room
A standalone GRP plantroom to protect the ice machine from the elements and for additional security when installing a machine outdoors. Arrives fully assembled, needs only a suitable base to bolt it down to. Min. size required: 2.3 x 2.3 x 2.0m high
Insulated ice storage boxes
Double walled polyethylene containers with polyurethane expanded foam interior, designed for storing and transporting ice. Made from food grade virgin USDA/FDA/EU approved polyethylene, PU filled & UV stabilised Strong and DurableStackable for space saving

Included with machine

Ziegra triple water fitration kit

The Ziegra triple water filtration unit helps prevent the water related problems that can impair the efficiency, reliablity and longevity of any ice machine.

Helps prevent the ingress of dirt and dissolved minerals which can coat evaporation surfaces, block lines and jam valves.

Large ice scoop

A large polymer scoop for hygienic handling of the ice.

Other options

Water connection hose (part # 970221124)

If you are self installing, you will need two water hoses, one to connect from the water supply to the inlet of the supplied Ziegra triple water filter and the other from the water outlet of the triple to the inlet of the ice machine.

You will also need a 1/2" to 3/4" adaptor bush.

Remote weatherproof and saltwater resistant condenser

A standard packaged ice machine has the condenser built into it. This is fine in enviroments that are cool and well ventilated, with clean air, however for environments that get hot, dusty or do not have very good ventilation a remote condenser mounted outside the building is the solution. Remote machines must only be professionally installed by persons qualified to do so. Remote condensers come weatherproofed as standard for outside installation, however for applications close to the sea, saltwater resistant Cu/Cu condensers are recommended.

Remote ice maker

For applications where space is limited the icemaker and refrigeration unit can be separate.

The icemaker is mounted close to where the ice is needed, while the refrigeration components are mounted in a more suitable remote location, often outside.

Also useful for installation into areas where access is limited and fitting a larger unit would be more difficult.

Upgrade to stainless steel frame and panels

Recommended in production environments when hygiene is of paramount importance. Also when the machine may be subject to corrossion due to lots of water and/or salt.

Auto flush cleaning system

Every Ziegra ice machine has as standard a sealed water system for maximum possible water hygiene. However for applications where hygiene is a high priority, additonal systems can be fitted. Auto water drain down empties the water resovoir every time the machine is switched off, preventing water from stagnating in the tank. Auto water drain down is available separately or with an additional auto flushing system. This system can be pre-set to automatically flush through the water system with clean water at intervals pre-determined by the customer.

Smartcart 240

109kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. Also available a set of six totes to fit inside the cart, 11kg capacity each to make applying ice a little easier on the back.

Smartcart 125

57kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. With integrated hinged lid.

Large polymer ice shovel (white)

one piece poly moulded ice shovel large white

One piece moulded ice shovel in white for the hygienic and rapid shovelling of large quantities of ice

Plant room

A standalone GRP plantroom to protect the ice machine from the elements and for additional security when installing a machine outdoors. Arrives fully assembled, needs only a suitable base to bolt it down to.

Min. size required: 2.3 x 2.3 x 2.0m high

Insulated ice storage boxes

Double walled polyethylene containers with polyurethane expanded foam interior, designed for storing and transporting ice.

Made from food grade virgin USDA/FDA/EU approved polyethylene, PU filled & UV stabilised Strong and DurableStackable for space saving

Ziegra Ice Machines (UK) Ltd

Tel: 0844 8808055