ZBE1.200-BK630 ice machine (standard and tropical versions)
 

The ZBE1.000-BK630-2 consists of a ZBE1.200 ice machine, installed on top of an BK630 elevated ice storage and cart system.

The unit operates automatically, stopping when the bin is full and re-starting when ice is removed.

Standard model guaranteed at 20°C air, 15°C water

Tropical model guaranteed at 35°C air, 25°C water

This type of flake ice is made at -0.5°C so will not freeze together, making it ideal where no refrigerated storage is available.

It is a plug in unit and requires only connection to water and mains power supply. It is continuously rated and works fully automatically. No moving parts in the refrigeration circuit of the evaporator, hence no leaks due to rotating seals.

The hygienic sealed water system, boxed in construction and stainless steel panels makes this machine ideal for installation in factory environments where safety and hygiene are of paramount importance, especially when people may be working around the machine.

The BK ice storage is an elevated bin and cart system which has gravity assisted ice removal and castered cart to deliver substantial labour and safety benefits. The BK is poly lined for maximum scale and chlorine resistance and bin access via SmartGATE with powerhinge door. Exterior finish is stainless steel and the insulated ice cart is a hygienic moulded polyethylene with a removeable poly lid.

Each unit comes complete with bin, base, 2 carts and ice paddle.

 
Ice machine specifications
Cabinet: Stainless steel
Warranty: 2 years
Ice production (24hours): 1,200kg
Ice storage 630kg bin (2.01m3) + 2 x Smartcart 240 (109kg) carts = 848kg
Condenser: Air cooled (water cooling available on request)
Voltage: 400-3-50Hz
Control voltage: 240-1-50Hz
Shipping dimensions: (wxdxh) 3 pieces: (1.7 x 1.32 x 1.8m) + (1.64 x 1.32 x 1.22m) + (0.89 x 0.82 x 1.19m)
Shipping weight: 3 pieces: 240kg + 180kg + 210kg
Power consumption: 4.9kW standard (5.0kW tropical)
Current consumption: 9.5A (10.5A tropical)
Refrigerant: R404A (3.3kg)
Heat emission: 10kW
Noise level: 60dBA - 3m
Water connection: 1/2" BSP (minimum water pressure 2bar, maximum 6bar)
Overflow: 14mm ø.
Fuse: 35A - slow
Cable cross section: 4 mm2, Cu.
 
Ice machine connections
ice machine connections

C. Ice outlet
D. Electric cable/plug
E. Water connection
F. Overflow
G. Filter
H. Stop valve
J. Fuses

Weight of ice machine only. 185kg
Weight of ice machine with bin. 585kg

Ice machine dimensions
ice machine dimensions
 
Available Ice Types
The ZBE1.200 ice machine can make any one of the ice types below, simply state on the order which type of ice you require. The ice type does not effect the price. Click on an image for details and images of each ice type.
 
micro flake ice
midi flake ice
macro flake ice
Very small flakes of ice, sometimes known as 'crushed ice'. The gentlest type of ice for packing delicate products and also where rapid cooling is required.

Medium sized flakes of ice.

Large sized flakes of ice. The large, thick pieces ensure long life in warm environments.  
 
Included with ice machine
Ziegra triple water filtration kit
ice machine water filter

The Ziegra triple helps prevent the water related problems that can impair the efficiency, reliablity and longevity of any ice machine.

Helps prevent the ingress of dirt and dissolved minerals which can coat evaporation surfaces, block lines and jam valves.

Water connection hose (part # 970221124)
ice machine water hose
Water inlet hose to connect from the outlet of the Ziegra triple water filter and the water inlet of the ice machine.
Large ice scoop
ice scoop
A large polymer scoop for hygienic handling of the ice.
2 x Smartcart 240
ice cart
109kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene
Ice paddle
ice paddle
Moulded polymer ice paddle to break up any ice bridges that may form within the bin
 
 
Other options
Remote weatherproof or saltwater resistant condenser
ice machine remote condenser
A standard packaged ice machine has the condenser built into it. This is fine in enviroments that are cool and well ventilated, with clean air, however for environments that get hot, dusty or do not have very good ventilation a remote condenser mounted outside the building is the solution. Remote machines must only be professionally installed by persons qualified to do so. Remote condensers come weatherproofed as standard for outside installation, however for applications close to the sea, saltwater resistant Cu/Cu condensers are recommended.
Auto drain down and flushing system
ice maker diagram
Every Ziegra ice machine has as standard a sealed water system for maximum possible water hygiene. However for applications where hygiene is a high priority, additonal systems can be fitted. Auto water drain down empties the water resovoir every time the machine is switched off, preventing water from stagnating in the tank. Auto water drain down is available separately or with an additional auto flushing system. This system can be pre-set to automatically flush through the water system with clean water at intervals pre-determined by the customer.
Extra Smartcart 240
ice cart
109kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. Also available a set of six totes to fit inside the cart, 11kg capacity each to make applying ice a little easier on the back.
 
 

 

Ziegra Ice Machines (UK) Ltd

Tel: 0844 8808055

 
Ziegra Ice Machines (UK) Ltd
Unit 2, Phoenix Court, Hammond Avenue, Stockport, Cheshire, SK4 1PQ
Tel:0844 8808055   Fax: 0161 480 7927   Email: ice@ziegra.co.uk

Specialists in...
Ice Production, Storage, Handling
and Dosing Systems