The ZBE250-S280 consists of a ZBE250 flake ice machine with a choice of two ice flake sizes, on top of an S280 slope fronted ice storage bin. The unit operates automatically, stopping when the bin is full and re-starting when ice is removed. This type of flake ice is made at -0.5°C so will not freeze together, making it ideal where no refrigerated storage is available. The ice machine is a plug in unit and requires only connection to water and mains power supply. It is continuously rated and works fully automatically. No moving parts in the refrigeration circuit of the evaporator, hence no leaks due to rotating seals. The hygienic sealed water system, boxed in construction and stainless steel panels makes this machine ideal for installation in factory environments where safety and hygiene are of paramount importance, especially when people may be working around the machine. The bin is of a slope fronted design and construction is of welded steel shell and frame. Exterior finish is stainless steel front, top and sides with galvanised steel back and bottom. The bin has non-corroding polyethylene liner inside. Insulation is non-CFC
polyurethane foam, bonded to shell and liner for added strength. Lift door has a stainless steel exterior and
ABS interior, bonded together with non-CFC polyurethane foam for extra rigidity and strength. A
conveniently low door sill height allows easy access to ice in the bottom of the bin. Door opening to be
sealed with fully replaceable gasketing. Legs adjustable from 152mm to 191mm. Bin drain 1” FPT rigid PVC. |
||||
Specifications
|
||||
Cabinet: | Stainless steel | |||
Warranty: | 2 years | |||
Ice production (24hours): | 250kg (guaranteed at 20°C air and 15°C water) | |||
Ice storage | 280kg (0.85m3) | |||
Voltage: | 240-1-50Hz | |||
Control voltage: | 240-1-50Hz | |||
Shipping dimensions: (wxdxh) | 1.28 x 0.87 x 2.0m | |||
Shipping weight: | 160kg | |||
Power consumption: | 1.1kW | |||
Current consumption: | 5.3A | |||
Refrigerant: | R404A (1.2kg) | |||
Air-cooled condenser (standard) | 830 m3 / hour | |||
Water-cooled condenser (option) | 110 l / hour at 15°C (1/2" inlet, 1/2" outlet) | |||
Heat emission: | 2.1kW | |||
Noise level: | 51dBA - 3m | |||
Water connection: | 3/4" BSP (minimum water pressure 2bar, maximum 6bar) | |||
Water quality: | Potable: Ph range between 6.5 and 9.5 (please inform us if supply is demineralized) | |||
Drain: | 1 in ø. (Ziegra recommends installation of a floor drain with grate) | |||
Fuse: | 13A | |||
Cable cross section: | 1.5mm2, Cu. | |||
Machine Connections
|
||||
A. Operating Switch Water cooled machine only Weight of machine. 80kg
|
Included with machine | ||
Ziegra single water filtration kit | ||
The Ziegra single water filtration unit helps prevent the water related problems that can impair the efficiency, reliablity and longevity of any ice machine. Helps prevent the ingress of dirt and dissolved minerals which can coat evaporation surfaces, block lines and jam valves. |
||
Water connection hose (part # 970221124) | ||
Water inlet hose to connect from the outlet of the Ziegra single water filter and the water inlet of the ice machine. | ||
Large ice scoop | ||
A large polymer scoop for hygienic handling of the ice. | ||
Other options
|
||
Auto drain down and flushing system |
||
Every Ziegra ice machine has as standard a sealed water system for maximum possible water hygiene. However for applications where hygiene is a high priority, additonal systems can be fitted. Auto water drain down empties the water reservoir every time the machine is switched off, thus preventing water from stagnating in the tank. Auto water drain down is available separately or with an additional auto flushing system. This system can be pre-set to automatically flush through the water system with clean water at intervals pre-determined by the customer. |
||
Smartcart 240 | ||
109kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. | ||
Smartcart 125 | ||
57kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. With integrated hinged lid. | ||
Large polymer ice shovel (white) |
||
One piece moulded ice shovel in white for the hygienic and rapid shovelling of large quantities of ice | ||
Upgrade to castor mounting | ||
Machine mounted on stainless steel castors instead of legs. Two of the castors are swivel and two are braked swivel. The wheel is white nylon with a plain bearing. The machine is easily moved for cleaning purposes. Overall Height : 156mm |
||
Ziegra Ice Machines (UK) Ltd Unit 2, Phoenix Court, Hammond Avenue, Stockport, Cheshire, SK4 1PQ Tel:0844 8808055 Fax: 0161 480 7927 Email: ice@ziegra.co.uk |