ZBE350-SG300 flake ice machine with storage
 

The ZBE350-SG300 consists of a ZBE350 ice machine on an SG300 SmartGate ice storage bin.

Operation is fully automatic, the machine stops when the bin is full and restarts again when ice is removed.

This type of flake ice is made at -0.5°C so will not freeze together, making it ideal where no refrigerated storage is available.

The ice machine is a plug in unit and requires only connection to water and mains power supply. It is continuously rated and works fully automatically. No moving parts in the refrigeration circuit of the evaporator, hence no leaks due to rotating seals.

The hygienic sealed water system, boxed in construction and stainless steel panels makes this machine ideal for installation in factory environments where safety and hygiene are of paramount importance, especially when people may be working around the machine.

The bin is of an upright design and features the unique SmartGate door access system. This system positively controls the flow of ice to the door snout area, thus reducing spillage and also ensures that the first ice in is the first ice out, eliminating hygiene problems due to stale ice in the bottom of the bin. The construction is of welded steel shell and frame with a stainless steel exterior finish.

The bin has non-corroding, seamless polyethylene liner inside. Insulation is non-CFC polyurethane foam, bonded to shell and liner for added strength. The lower door assembly has a poly lift door with PowerHinge to eliminte gaskets and latches. The entire lower door assembly can be removed with three screws for installation through narrow doorways. Upper inspection doors are double wall poly to increase durability and minimise melt losses and condensation. Legs are adjustable from 152mm to 191mm. Bin drain 1” FPT rigid PVC.

350kg ice machine on hygienic 300kg ice store
 
Specifications
Cabinet: Stainless steel
Warranty: 2 years
Ice production (24hours): 350kg (guaranteed at 20°C air and 15°C water)
Ice storage 300kg (0.9m3)
Voltage: 240-1-50Hz (400-3-50Hz on request)
Control voltage: 240-1-50Hz
Shipping dimensions: (wxdxh) 1.29 x 1.07 x 2.1m
Shipping weight: 230kg
Power consumption: 1.6kW
Current consumption: 7.3A
Refrigerant: R404A (1.2kg)
Air-cooled condenser (standard) 1,400 m3 / hour
Water-cooled condenser (option) 160 l / hour at 15°C (1/2" inlet, 1/2" outlet)
Heat emission: 2.6kW
Noise level: 55dBA - 3m
Water connection: 3/4" BSP (minimum water pressure 2bar, maximum 6bar)
Water quality: Potable: Ph range between 6.5 and 9.5 (please inform us if supply is demineralized)
Drain: 1 in ø. (Ziegra recommends installation of a floor drain with grate)
Fuse: 13A
Cable cross section: 1.5mm2, Cu.
       
Connections
350kg ice machine connections

A. Operating Switch
D. Electric cable/plug
E. Water connection hose (supplied)
F. Overflow
G. Filter - Ziegra single (supplied)
H. Stop valve
J. Electrical supply

Water cooled machine only
O. Cooling water inlet
P. Cooling water outlet

Weight of machine. 90kg
Weight of machine with bin. 216kg

 

Dimensions
350kg ice machine on storage bin dimensions
     
Available Ice Types
The ZBE350 can make either of the ice types below, simply state on the order which type of ice you require. The ice type does not effect the price. Click on an image for details and images of each ice type.
Micro flake ice
Midi flake ice
 
micro flake ice midi flake ice
Very small flakes of ice, sometimes known as 'crushed ice'. The gentlest type of ice for packing delicate products and also where rapid cooling is required.

Medium sized flakes of ice.

 
   
Included with machine
Ziegra single water filtration kit
Ziegra single water filter for small ice machines

The Ziegra single water filtration unit helps prevent the water related problems that can impair the efficiency, reliablity and longevity of any ice machine.

Helps prevent the ingress of dirt and dissolved minerals which can coat evaporation surfaces, block lines and jam valves.

Water connection hose (part # 970221124)
water connection hose for ice machine
Water inlet hose to connect from the outlet of the Ziegra single water filter and the water inlet of the ice machine.
Large ice scoop
poly ice scoop
A large polymer scoop for hygienic handling of the ice.
 
 
Other options
Remote weatherproof or saltwater resistant condenser
Remote condenser
A standard packaged ice machine has the condenser built into it. This is fine in enviroments that are cool and well ventilated, with clean air, however for environments that get hot, dusty or do not have very good ventilation a remote condenser mounted outside the building is the solution. Remote machines must only be professionally installed by persons qualified to do so. Remote condensers come weatherproofed as standard for outside installation, however for applications close to the sea, saltwater resistant Cu/Cu condensers are recommended.
Auto drain down and flushing system
water flushing system
Every Ziegra ice machine has as standard a sealed water system for maximum possible water hygiene. However for applications where hygiene is a high priority, additonal systems can be fitted. Auto water drain down empties the water resovoir every time the machine is switched off, preventing water from stagnating in the tank. Auto water drain down is available separately or with an additional auto flushing system. This system can be pre-set to automatically flush through the water system with clean water at intervals pre-determined by the customer.
Smartcart 240
Smartcart 240 ice transport cart
109kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene.
Smartcart 125
57kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. With integrated hinged lid.
Large polymer ice shovel (white)
large moulded plastic ice shovel
One piece moulded ice shovel in white for the hygienic and rapid shovelling of large quantities of ice
Upgrade ice machine to castor mounting
set of castors for ice machine

Machine mounted on stainless steel castors instead of legs. Two of the castors are swivel and two are braked swivel. The wheel is white nylon with a plain bearing. The machine is easily moved for cleaning purposes.

Overall Height : 156mm
Wheel Size : 125mm

 

 

Ziegra Ice Machines (UK) Ltd

Tel: 0844 8808055

 
Ziegra Ice Machines (UK) Ltd
Unit 2, Phoenix Court, Hammond Avenue, Stockport, Cheshire, SK4 1PQ
Tel:0844 8808055   Fax: 0161 480 7927   Email: ice@ziegra.co.uk

Specialists in...
Ice Production, Storage, Handling
and Dosing Systems